|
|
 |
|
Product folder
EM6522
MFP version of EM6625 and EM6626, ideal for development stage |
|
|
|
| |
Datasheet
 |
DataSheet
1072 Kb
|
|
|
|
| |
| General description |
The EM6522 is an advanced single chip CMOS 4-bit microcontroller. It contains RAM, LCD driver, power on reset, watchdog timer, oscillation detection circuit, 10-bit up/down and event counter, 1ms BCD counter, prescaler, voltage level detector (Vld), serial interface and several clock functions. The low voltage feature and low power consumption make it the most suitable controller for battery, stand alone and mobile equipment. The EM6522 is manufactured using an Advanced Low Power CMOS process.
|
| |
| Features |
• Low Power - 11µA active mode, LCD On
• - 1.8µA standby mode, LCD Off
• - 0.1µA sleep mode
• @ 3.0 V, 32 KHz, 25 ºC
• Voltage - 2.0 to 5.5 V
• 2 clocks per instruction cycle
• RISC architecture (72 basic instructions)
• EEPROM 4096 x 16 (Program memory)
• RAM 128 x 4 (User Read/Write)
• Max. 12 inputs ; port A, port B, port SP
• Max. 8 outputs ; port B, port SP
• Voltage Level Detector, 8 levels software selectable from 1.2 V up to 4.0 V
• Melody, 7 tones + silence inclusive 4-bit timer
• Universal 10-bit counter, PWM, event counter
• Prescaler down to 1 second ( crystal = 32 KHz )
• 1/1000 sec 12 bit binary coded decimal counter with hard or software start/stop function
• LCD 32 Segments, 3 or 4 times multiplexed
• 3 wire serial port , 8 bit, master and slave mode
• 5 external interrupts (port A, serial interface)
• 8 internal interrupts (3x prescaler, BCD counter, 2x10-bit counter, melody timer, serial interface)
• Timer watchdog and oscillation supervisor
|
| |
| Applications notes |
| • How to drive a static LCD from a standard I/O port |
 |
AN #25
40 Kb |
|
| • Frequently Asked Questions for 4-bit EM66xx and EM65xx |
|
|
QA
110 Kb |
|
| • Memory Requirements for Clock Applications |
|
|
AN #12
101 Kb |
|
| • Ohmmeter application with EM6X20 |
|
|
AN #18
161 Kb |
|
| • Frequently Used Software Routines for EM 4-bit Microcontrollers (EM66xx and EM65xx products) |
|
|
AN #30
178 Kb |
|
|
| |
| Errata |
Buzzer on the emulator EM6621/22/25/26 and EM6821
The Emulator Buzzer output connector pin (nbr 21) does only pull high and its tristate function is not correctly implemented.
Correction: New emulators dated march/2000 and up are ok. The old emulators need to be send back to EM for correction, or EM should send a corrected FPGA setup EEPROM.
Emulator Bug
The instructions NAND, NANDS, NANDX, NANDXS do not work on the emulator.
They are working correctly on simulator and chip.
Valid for all members of the 4-bit microcontroller family.
| | |
| Demo Program |
Example program for the EM6622/26
A program which simply rolls a message on the LCD.
 |
45 Kb |
Example program for the EM6622/26
|
|
109 Kb |
Example of a calculator
|
|
67 Kb |
Communication example program
With the EM6x17 in master mode and the EM6x22 (or EM6626) in slave mode.
|
|
76 Kb |
Communication example program
With the EM6x22 (or EM6626) in master mode and the EM6x17 in slave mode.
|
|
78 Kb |
Example program for the demo board EM6522
Real time clock with count down
|
|
84 Kb |
Ohmmeter by the measurement of resistors
|
|
90 Kb |
Example program on EM microcontroller peripherals
|
|
148 Kb |
|
|
|
|
|
|
